How to descale Delonghi Eletta Explore
Keeping your Delonghi Eletta Explore coffee machine in top condition is essential for enjoying the perfect cup of coffee every time. One of the most important maintenance tasks is descaling, which helps to remove mineral buildup that can affect the taste and performance of your machine. In this article, we will guide you through the process of descaling your Delonghi Eletta Explore coffee machine, ensuring it remains in optimal condition for years to come.
Before you begin, gather the following materials:
- Descaling solution (such as Delonghi’s own descaling solution or a commercial descaler like Ristretto Roast or Urnex)
- Water (preferably filtered to remove impurities)
- A funnel
- A cloth or paper towel
Step 1: Prepare the descaling solution
Follow the instructions provided with your descaling solution to prepare the mixture. Typically, you will need to mix the solution with water according to the manufacturer’s recommended ratio. It’s important to use the correct concentration to avoid damaging your coffee machine.
Step 2: Empty the water tank
Turn off your Delonghi Eletta Explore and unplug it from the power source. Open the water tank and remove any remaining water. Dispose of it in the sink.
Step 3: Fill the water tank with the descaling solution
Using a funnel, carefully pour the prepared descaling solution into the water tank. Make sure the tank is filled to the maximum level indicated on the tank.
Step 4: Run the descaling cycle
Close the water tank and place the coffee machine back on the power source. Turn on the machine and select the descaling cycle. The cycle may take several minutes to complete, depending on the model of your Delonghi Eletta Explore.
Step 5: Flush the system
Once the descaling cycle is complete, the machine will automatically flush the system with water. This step is crucial to remove any remaining descaling solution from the machine. Allow the machine to run through the entire flush cycle, which may take several minutes.
Step 6: Clean the machine
After the flush cycle is complete, turn off the machine and unplug it from the power source. Open the water tank and empty any remaining water. Wipe down the exterior of the machine with a cloth or paper towel to remove any spills or residue.
Step 7: Refill the water tank with fresh water
Once the machine is clean, refill the water tank with fresh, filtered water. Close the tank and place the machine back on the power source.
By following these steps, you can effectively descale your Delonghi Eletta Explore coffee machine and ensure it continues to produce great-tasting coffee. Remember to perform this maintenance task regularly, as recommended by the manufacturer, to keep your coffee machine in excellent condition.
