How to Start Ford Explorer with Manual Key
Starting your Ford Explorer with a manual key can be a straightforward process if you follow the correct steps. Whether you’re new to the vehicle or simply need a refresher, this guide will walk you through the process of starting your Ford Explorer with a manual key.
1. Locate the Ignition Cylinder
First, locate the ignition cylinder on the driver’s side of the dashboard. It is typically positioned near the steering column. You should see a small, circular keyhole.
2. Insert the Manual Key
Take your manual key and insert it into the keyhole. Make sure the key is inserted all the way into the cylinder.
3. Turn the Key
Grip the key with both hands and turn it clockwise. You should feel resistance as the cylinder engages. Continue turning the key until you hear a click, indicating that the engine is ready to start.
4. Start the Engine
Once you hear the click, release the key. The engine should start automatically. If it doesn’t, make sure the key is fully inserted and try turning it again.
5. Set the Parking Brake
After the engine starts, set the parking brake to ensure the vehicle remains stationary. This is an important safety step, especially when the vehicle is on an incline.
6. Shift to Drive
Once the engine is running and the parking brake is engaged, shift the transmission into drive. This will allow you to start driving your Ford Explorer.
7. Remove the Key
After you have started the engine and shifted into drive, you can remove the key from the ignition cylinder. Be sure to keep the key in a safe place to avoid losing it.
By following these simple steps, you should be able to start your Ford Explorer with a manual key without any issues. Remember to always follow safety precautions when operating your vehicle, such as wearing a seatbelt and being aware of your surroundings.
