How to Replace Tire Pressure Sensor on 2016 Ford Explorer
Keeping your vehicle’s tire pressure sensors in good working condition is crucial for your safety and the overall performance of your 2016 Ford Explorer. Over time, these sensors can fail, leading to inaccurate tire pressure readings or complete system failure. In this article, we will guide you through the process of replacing the tire pressure sensor on your 2016 Ford Explorer, ensuring that your vehicle remains safe and efficient on the road.
Before you begin, gather the necessary tools and materials:
- Replacement tire pressure sensor
- Screwdriver set
- Socket set
- Socket wrench
- Anti-seize lubricant
- New battery for the sensor (if required)
Step 1: Park your 2016 Ford Explorer on a flat and level surface, and turn off the engine. Ensure that the vehicle is in park or neutral, and apply the parking brake for safety.
Step 2: Open the hood of your Ford Explorer and locate the tire pressure sensor. The sensor is typically mounted on the valve stem of each tire, with a small plastic cap covering it. Remove the cap by gently pulling it off.
Step 3: Use a socket set to remove the bolt securing the tire pressure sensor to the valve stem. Be sure to place a socket wrench on the bolt to avoid stripping it.
Step 4: Once the bolt is loose, gently pull the tire pressure sensor off the valve stem. If the sensor is stuck, apply a small amount of anti-seize lubricant to the threads of the valve stem to help release it.
Step 5: Remove the old battery from the sensor, if applicable. This may require a flathead screwdriver to remove the battery cover. Dispose of the old battery properly, as it contains harmful materials.
Step 6: Install the new tire pressure sensor onto the valve stem. Ensure that the sensor is properly seated and that the bolt is tight. Apply anti-seize lubricant to the threads of the bolt for future maintenance.
Step 7: Reinstall the plastic cap over the valve stem and secure it in place.
Step 8: Repeat the process for each tire on your 2016 Ford Explorer.
Step 9: Test the new tire pressure sensors by starting your vehicle and checking the tire pressure display. The new sensors should provide accurate readings.
Step 10: Dispose of the old tire pressure sensors and batteries properly, following local regulations.
By following these steps, you can successfully replace the tire pressure sensor on your 2016 Ford Explorer. Regular maintenance of your tire pressure sensors will help ensure your vehicle’s safety and performance on the road.
