How to Make Chair Pockets from Pillowcases
Transforming pillowcases into chair pockets is a creative and budget-friendly way to add a touch of style to your home. Not only does it give new life to old pillowcases, but it also provides a practical storage solution for your living room or office. In this article, we will guide you through the simple steps to make chair pockets from pillowcases, ensuring that your space looks organized and chic.
Materials Needed
Before you start, gather the following materials:
– Old pillowcases (preferably cotton or a similar breathable fabric)
– Measuring tape
– Scissors
– Sewing machine or needle and thread
– Iron and ironing board
– Matching thread
– Optional: decorative buttons or ribbons for embellishment
Step 1: Choose the Pillowcase
Select an old pillowcase that you no longer use or one that you want to repurpose. Ensure that the fabric is sturdy and in good condition. Pillowcases with intricate patterns or vibrant colors will add a pop of personality to your chair pockets.
Step 2: Measure and Cut
Lay the pillowcase flat on a clean surface. Measure the desired width of your chair pocket, keeping in mind the depth and height you want. Mark the measurements on the pillowcase and cut along the marked lines. If you’re unsure about the dimensions, you can refer to a chair’s armrest size for guidance.
Step 3: Hem the Edges
Fold the cut edges of the pillowcase inside by half an inch and press with an iron. Then, fold them again by half an inch and press again. This will create a neat hem. Sew along the hemmed edges using a sewing machine or a needle and thread.
Step 4: Create the Pockets
Fold the pillowcase in half lengthwise, with the right sides facing each other. Place the pillowcase on a flat surface and mark the desired pocket positions. Make sure the marks are evenly spaced and aligned with the armrests of the chair. Cut small slits in the pillowcase fabric at the marked positions, being careful not to cut through the hem.
Step 5: Attach the Pockets
Open the pillowcase and fold the edges of the slits inward, creating a pocket shape. Press with an iron to ensure the edges are crisp. Pin the pockets in place on the pillowcase, aligning them with the previously marked positions. Sew the pockets to the pillowcase, securing them in place.
Step 6: Optional Embellishments
If you wish to add a touch of flair to your chair pockets, consider embellishing them with decorative buttons, ribbons, or other trims. Sew the embellishments onto the pockets using a needle and thread, or use a sewing machine for a neater finish.
Step 7: Final Touches
Once all the pockets are attached and embellishments are in place, iron the pillowcase to remove any wrinkles. Place the chair pockets on your chosen chair, and enjoy the stylish and functional addition to your space.
Making chair pockets from pillowcases is a simple and enjoyable project that can be completed in a few hours. Not only will you have a unique storage solution, but you’ll also be repurposing old items and adding a personal touch to your home. Happy crafting!
