How to Craft a Reading Pillow with a Convenient Pocket- A Step-by-Step Guide

by liuqiyue

How to Make a Reading Pillow with Pocket

Creating a reading pillow with a pocket is a fantastic way to enhance your reading experience. Not only does it provide comfort, but it also offers a convenient place to store your favorite books, snacks, or even your phone. In this article, we will guide you through the process of making a reading pillow with a pocket, ensuring that you have a cozy and functional reading companion.

Materials Needed

Before you start, gather the following materials:

– Fabric: 1 yard of your choice (cotton, flannel, or microfiber)
– Pillow insert: 16″ x 16″
– Thread: coordinating color
– Scissors
– Measuring tape
– Sewing machine or needle and thread
– Pinking shears (optional)
– Iron and ironing board

Step 1: Cutting the Fabric

1. Measure and cut two pieces of fabric, each measuring 18″ x 18″. These will be the front and back of your reading pillow.
2. Cut two pieces of fabric, each measuring 3″ x 18″. These will be the side pieces.
3. Cut a piece of fabric, measuring 3″ x 3″. This will be the pocket.

Step 2: Sewing the Side Pieces

1. Place the two 3″ x 18″ side pieces right sides together.
2. Sew along the 18″ side, leaving a 1/2″ seam allowance.
3. Turn the side pieces right side out and press with an iron.

Step 3: Attaching the Side Pieces

1. Place the front and back pieces right sides together.
2. Align the side pieces with the edges of the front and back pieces, making sure the seams are even.
3. Sew along the edges, leaving a 1/2″ seam allowance.

Step 4: Creating the Pocket

1. Fold the 3″ x 3″ pocket piece in half, right sides together, and sew along the sides and bottom, leaving the top open.
2. Turn the pocket right side out and press with an iron.

Step 5: Attaching the Pocket

1. Place the pocket on the front piece of the pillow, centered and aligned with the top edge.
2. Pin the pocket in place and sew around the edges, securing it to the front piece.

Step 6: Closing the Pillow

1. Turn the pillow right side out and press with an iron.
2. Insert the pillow insert into the pillow case.

Congratulations! You have successfully made a reading pillow with a pocket. Enjoy your cozy reading experience with your new, personalized pillow.

You may also like