How to Install Fluidmaster Universal Perfect Fit Toilet Tank Lever
Installing a Fluidmaster Universal Perfect Fit Toilet Tank Lever is a straightforward process that can significantly enhance the functionality and aesthetics of your bathroom. This article will guide you through the steps to successfully install this toilet tank lever, ensuring a seamless and hassle-free experience.
Materials Needed:
Before you begin, gather the following materials:
– Fluidmaster Universal Perfect Fit Toilet Tank Lever
– Screwdriver
– Pliers
– Replacement tank lever, if necessary
– plumber’s grease
Step 1: Preparation
1. Remove the old tank lever: Carefully unscrew the old tank lever from the tank using a screwdriver. If the lever is stuck, apply a small amount of plumber’s grease to the threads and wait a few minutes before attempting to remove it again.
2. Inspect the tank: Check the tank for any damage or corrosion. If you find any issues, address them before proceeding with the installation.
Step 2: Install the New Lever
1. Align the new lever with the tank mounting bracket: Position the new lever so that it aligns with the tank mounting bracket. Ensure that the lever is in the correct position to operate the flush valve.
2. Attach the lever to the tank: Secure the lever to the tank by inserting the mounting bracket through the hole in the tank. Tighten the screw using a screwdriver to hold the lever in place.
3. Attach the handle: Place the handle on the lever and secure it using the included screw. Tighten the screw with a screwdriver until the handle is firmly in place.
Step 3: Adjust the Lever
1. Test the lever: After installing the lever, test it to ensure it operates the flush valve correctly. The lever should move smoothly and engage the flush valve without any resistance.
2. Adjust the lever position: If the lever is not in the desired position, adjust it by loosening the screw and moving the lever to the correct spot. Once satisfied, retighten the screw to secure the lever in place.
Step 4: Final Check
1. Check for leaks: Make sure there are no leaks around the tank lever and flush valve. If you notice any leaks, tighten the connections or replace the tank gasket if necessary.
2. Test the flush: Perform a flush to ensure the lever operates the flush valve as expected. The tank should fill up quickly and the toilet should flush properly.
Congratulations! You have successfully installed the Fluidmaster Universal Perfect Fit Toilet Tank Lever. This new lever will provide a more comfortable and efficient experience for you and your household.
