How to Empty Aerogarden Water: A Step-by-Step Guide
Aerogardens are a fantastic way to grow fresh herbs and vegetables indoors, but one common question among users is how to properly empty the water from the Aerogarden. This is an essential step to ensure the health of your plants and maintain the functionality of your Aerogarden. In this article, we will provide you with a step-by-step guide on how to empty Aerogarden water effectively.
Step 1: Power Off the Aerogarden
Before you begin, it is crucial to turn off the Aerogarden to prevent any accidents or damage to the device. Locate the power switch on the base of the Aerogarden and turn it off.
Step 2: Remove the Water Reservoir
The water reservoir is where the Aerogarden stores the water that circulates through the system. To remove it, gently pull it out from the base of the Aerogarden. Be sure to hold the reservoir securely to avoid spilling any water.
Step 3: Empty the Reservoir
Once the reservoir is removed, tilt it slightly to allow the water to drain out. It is important to empty the reservoir completely to prevent any algae growth or bacterial contamination. If there is any residue left, you can use a soft cloth or sponge to wipe it clean.
Step 4: Clean the Reservoir
After emptying the reservoir, it is essential to clean it thoroughly to maintain the quality of your Aerogarden water. Use a mild detergent and warm water to clean the reservoir. Be sure to rinse it well to remove any soap residue.
Step 5: Refill the Reservoir
Once the reservoir is clean, it is time to refill it with fresh water. Ensure that the water level is sufficient to cover the roots of your plants. It is recommended to use filtered or distilled water to avoid any mineral buildup or algae growth.
Step 6: Reinstall the Reservoir
After refilling the reservoir, carefully slide it back into the base of the Aerogarden. Make sure it is securely in place to prevent any leaks or malfunctions.
Step 7: Power On the Aerogarden
Finally, turn on the Aerogarden to resume its normal operation. The Aerogarden will automatically circulate the water through the system, providing your plants with the necessary hydration.
By following these simple steps, you can effectively empty Aerogarden water and maintain the health of your indoor garden. Remember to empty and clean the reservoir regularly to ensure the best performance of your Aerogarden. Happy gardening!
