How to Change the Battery in a Cateye Strada Wireless
Are you looking to replace the battery in your Cateye Strada Wireless bike computer? Keeping your bike computer powered up is essential for monitoring your rides, and knowing how to change the battery can save you time and frustration. In this article, we’ll guide you through the process of changing the battery in your Cateye Strada Wireless step by step.
Step 1: Gather the Necessary Tools
Before you begin, make sure you have the following tools on hand:
– A small flathead screwdriver
– Replacement CR2032 battery
Step 2: Locate the Battery Compartment
Open the back cover of your Cateye Strada Wireless bike computer. The battery compartment is typically located on the back of the device, and it is usually secured with a single screw.
Step 3: Remove the Screw
Using your flathead screwdriver, carefully remove the screw that secures the battery compartment. Set the screw aside for later use.
Step 4: Open the Battery Compartment
Gently slide the battery compartment cover off the device. Be cautious as the cover may be fragile.
Step 5: Remove the Old Battery
Locate the old CR2032 battery inside the compartment. It is held in place by a small clip. Use your fingers to gently push the battery out of the compartment.
Step 6: Insert the New Battery
Take the new CR2032 battery and align it with the positive (+) and negative (-) symbols inside the compartment. Carefully slide the battery into the compartment, ensuring that it is properly seated.
Step 7: Close the Battery Compartment
Place the battery compartment cover back onto the device and align it with the clips. Press down firmly until the cover clicks into place.
Step 8: Secure the Battery Compartment
Using the screw you removed earlier, securely reattach the battery compartment cover to the device. Tighten the screw until it is snug, but be careful not to overtighten it.
Step 9: Power On the Device
With the new battery installed, power on your Cateye Strada Wireless bike computer. The device should now be functioning properly with the new battery.
Congratulations! You have successfully changed the battery in your Cateye Strada Wireless bike computer. By following these simple steps, you can keep your bike computer powered up and ready for your next ride.
